Industrial Dryer (ENA-150C)

Multi-function Dry and Safety
Clearly identified LED control panel provides setting of 15 drying strike, allowing for accurate management of drying operation.

With using advanced technology heater and unique designed blower, this machine has high efficient drying capability.

The inverter controls blower's start and speed and automatic-checking intelligent blower rotation control system, when air exhausting has backpressure in checking, the rotation speed of blower would be automatic revised, won't be controlled by air exhausting backpressure to influence the drying.

Easily clean side cotton screen, big door diameter, clean easily. (Can be draw out from the rear side for clean).

12.7 mm square holes, the opening percentage of the internal barrel reaches 64%, increasing ventilation efficiency, higher drying speed.

Advection hot air design, let more hot air blow the linen, do not waste the hot air, effecting the drying time shortest.

6 agitating rods have a good agitating result, reduce bed sheet tangling or the rubs between bed sheet and internal barrel that lower the cotton wool and extend the linen lives.

1672 mm large internal barrel permits linen fully unfolding for drying, with using rotation control of drum, preventing linen from unevenly drying or tangling.

Unique drum operation control, preventing linen from crushing or tangling. If the bath towel has much water, the rotating speed will be low; If there is little water, the rotating speed will be fast. Half-drying bed sheet, quilt cover etc., the clockwise rotation is slow, counterclockwise rotation is fast.

Can with output convey belt, save carrying time, improve working efficiency.

Model
ENA-150C
Motors
Drum Motor
2.2kw×4P
Loading(kg)
150
Blower
7.5kw× 4P
Distill speed (kg/hr)
256
Total Capacity(kw)
9.7
Steam consumption (kg/hr)
528
Pipe
Steam
2"
Drum
Diameter(mm)
1672
Cooling water
1  1/2"
Depth(mm)
1445
Air
3/8"
Capacity(Liter)
3171
Required steam pressure (kg/cm²)
7.0
R. P. M
Clockwise 25rpm   Counterclockwise 30rpm
Air Consumption(NL/Time)
35
Punch Hole(mm)
12.7mm  Square
Duct Pipe
ø 600mm or 3000cm²
Air Flow(m³ /min)
200
Power Supply
  3ph 220v/380v 50/60Hz
Door Dimension
Front(mm)
1100x577
Distributed Electricity(mm² )
14  / 8
Rear(mm)
ø 1584
Max. Current(A)
36 / 22
Controller by
Touch Panel
Breaker (A)
75/ 50
Dimension(L× W× H )(mm)
2355× 2725× 3040(Height size including 350mm shelves height)
Net Weight(kg)
2200
The material inner container
Baked paint